écran bleu
Posté : 05 févr. 2008, 22:04
salut à tous,
je viens de m'acheter un pc acer aspire M1610 avec window vista installé dessus, donc jusque là tout allait pour le mieux, puis j'ai installer internet et là çà a commencer! pendant 2 semaine tout fonctionnait correctement mais dimanche dernier lorsque g éteint et rallumé quelques heure plus tard bin j'avais un écran bleu avec un message d'erreur et en anglais bien sur, alors voici ce message:
" A problem hafe been detected end windows hafe been shut down to present damage to your computer.
If this is the first time you’ve seen this stop error screen restart your computer.
If this screen appears again, follow these steps..
Check to make sure any new hardware or software if properly installed.
If this if a new instalation, ask your hardware or software manufactured for any windows updates you might need.
If probleme continu, disabe or remove any newly installed hardware or software.
Disable bias nemory option such as caching or shodaving.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advenced strartup options, end then select safe mode.
Technical information :
Stop : 0x0000001A(0x00000782,0x8ca4f708,0x939c0000,0x90104bfo) "
bien sur je n'ai pas un cd d'installation de vista ni quoi que ce soit d'autre puisque tout était déjà installer sur le pc
je ne sais pas quoi faire, aidez moi please
merci
je viens de m'acheter un pc acer aspire M1610 avec window vista installé dessus, donc jusque là tout allait pour le mieux, puis j'ai installer internet et là çà a commencer! pendant 2 semaine tout fonctionnait correctement mais dimanche dernier lorsque g éteint et rallumé quelques heure plus tard bin j'avais un écran bleu avec un message d'erreur et en anglais bien sur, alors voici ce message:
" A problem hafe been detected end windows hafe been shut down to present damage to your computer.
If this is the first time you’ve seen this stop error screen restart your computer.
If this screen appears again, follow these steps..
Check to make sure any new hardware or software if properly installed.
If this if a new instalation, ask your hardware or software manufactured for any windows updates you might need.
If probleme continu, disabe or remove any newly installed hardware or software.
Disable bias nemory option such as caching or shodaving.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advenced strartup options, end then select safe mode.
Technical information :
Stop : 0x0000001A(0x00000782,0x8ca4f708,0x939c0000,0x90104bfo) "
bien sur je n'ai pas un cd d'installation de vista ni quoi que ce soit d'autre puisque tout était déjà installer sur le pc
je ne sais pas quoi faire, aidez moi please
merci